Flake or granule materials are put into chamber above perforated plate.
The hot air for drying is getting into the bottom of the moving plate.
Drying / cooling continuously and wildly fluidize the raw material and dry in short time.
And wet air passing through the fluidized bed is discharged to outdoor air after fine dust collection from a collecting device.

• Operation unit: drying, solvent recovery, cooling, heat treatment (crystallization), etc.
• Materials: synthetic resin (PVC, PP, PE, ABS, MBS, PPS, etc.), food, chemical, fertilizer, feed, agrichemicals, ceramics, pigment, etc.

• Materials dried in a constant-rate drying are processed in a wet-bulb temperature, enabling drying to low moisture content, under a relatively low temperature.
• Suitable for granules or crystallized materials because of Minimized damage to the material.
• High drying efficiency by installing the heat exchanging tubes or panels, which cover 80% of heat exchange process.
• Required gas amount is small due to the large heat exchanging area of tubes or plates installed inside the FBD. Therefore, the sizes of each equipment of the system, such as the fluidized bed body, blowers, and dust collecting is minimized.
• Easy to remove the heat exchanging media. CIP unit is also available.
• Large size FBD for mass production is available (past record of 102m2).
• Drying and cooling can be done in one unit.