This dryer has a heated trough containing rotating heated paddle shafts.Two hollow shafts with hollow paddles turn in opposite directions in the horizontal trough.As a conduction heating and indirect thermal drying equipment,Two The dryer consists of shell & jacket and the wedge shaped paddles.Wet material is dried by heat conduction of the paddle surfaces and jacketed shell surface heated by the heating media (steam, thermal oil and hot water) which are the dry heat source supplied to the dryer’s shafts and jacketed shell.Product is gradually transported by transfer blades attached to the rotating paddle surface,and finally discharged with dried condition after drying / cooling process.

As a hybrid drying equipment of a rotary dryer + flash dryer, There are rotating shell, main tube and hot air pipes protruded from the main tube.The hot air is directly contacted with raw material and pass through between the material particles at high speed, so that the heat transfer coefficient between the hot air and the material is increased and rapidly heating raw materials for efficient drying.

This is a swirling- flash type by rising hot air.The raw material is firstly disintegrated by pulverizer in the drying chamber and accelerated disintegration and improve drying efficiency with hot air.The hot air flows in the tangential direction and forms a swirling upward flow. During the hot air rises to the top of the dryer, the materials are dried and transported together.Finally collected to a cyclone as powder form.

As a swirling- flash type by rising hot air.There are hammer mill and classifier are installed inside of the dryer, so the materials of cake, flake shape can be done of drying, grinding and classifying in one process.

This dryer has a vibration motor to smooth transport of material during fluidized bed drying process.The material is put into the dryer and fluidized by the hot /cold air and driven by the propulsive force of the vibration motor.

This FINE DRYER is a process equipment to move fine particles like fluids with just a vibrating force and dry them by indirect heating so that no foreign substance gets mixed in.This dryer is also applicable for a wide range of products and even for cohesive particles, it is a breakthrough vibration dryer that makes it possible to install cracking function, dry it by low temperature, and evaporate it.

Drying is carried out by the conduction heat transfer of steam tube installed in the cylinder rotating slowly.The dryer has gradual slope of 1 to 5 degrees, and the material is fed into end inlet and discharged at the opposite end outlet during detention.

Hot air and steam are passed granulated material through and dry the material gradually.By gravity, the material moves gradually to the lower part of dryer.Drying is carried out by hot air passing through a number of perforated plates and by the heating surfaces.The hot air used for drying is discharged to the outside through exhaust plate in the dryerand steam condensate is discharged through a trap.

A variety of materials are mixed and dispersed by a plough-shaped mixing mlade attached to a rotating shaft inside the body.High speed rotating Chopper Blade improves product mixing rate and enables to obtain uniform mixture in a short time.

Double arm equipment which is called KNEADER is the typical example of batch mixer. It is suitable for the mixing and kneading of high viscosity materials. KNEADER has two blades inside the W-shaped body and the blades are revolving at different speeds. The revolving blades make the materials mixed and pressed from the outside force of shearing. The subsidiary devices are manual or automatic ones that blow after the complete mixing. Through the inside of the body jackets or blades heating and cooling with steams or coolants are possible. In terms of the substantial containment, 40~60% of inside capacity is proper.

As equipment to simultaneously carry out transfer and mixing,The paddle blades near inner wall of the vessel rotate at low speed and processes the product.A variety of materials are mixed / dispersed by the paddles attached to the two rotating shafts in fixed body.

We first clearly understand the various types of material characteristics that apply to thermal automation systems. Then, based on various powder handling experience, we produce the best conveying facility to operate safely.

Our Low Power Low Carbon SCREW PRESS complements the existing SCREW PRESS dramatically, greatly reducing the operating costs of existing centrifugal dehydrators and belt presses, enabling convenient operation, improved working conditions, and continuous automatic operation.

Design and produces half of raw materials for industrial fields such as petrochemical, synthetic chemistry and catalytic chemistry.The operating methods are classified as batch, half-batch (batch type), flow type (flow type), and continuous type.Structural types are tubular reactors, tower reactors, stirred tank reactors, and fluidized bed reactors.