This dryer has a heated trough containing rotating heated paddle shafts.Two hollow shafts with hollow paddles turn in opposite directions in the horizontal trough.As a conduction heating and indirect thermal drying equipment,Two The dryer consists of shell & jacket and the wedge shaped paddles.Wet material is dried by heat conduction of the paddle surfaces and jacketed shell surface heated by the heating media (steam, thermal oil and hot water) which are the dry heat source supplied to the dryer’s shafts and jacketed shell.Product is gradually transported by transfer blades attached to the rotating paddle surface,and finally discharged with dried condition after drying / cooling process.

As a hybrid drying equipment of a rotary dryer + flash dryer, There are rotating shell, main tube and hot air pipes protruded from the main tube.The hot air is directly contacted with raw material and pass through between the material particles at high speed, so that the heat transfer coefficient between the hot air and the material is increased and rapidly heating raw materials for efficient drying.

This is a swirling- flash type by rising hot air.The raw material is firstly disintegrated by pulverizer in the drying chamber and accelerated disintegration and improve drying efficiency with hot air.The hot air flows in the tangential direction and forms a swirling upward flow. During the hot air rises to the top of the dryer, the materials are dried and transported together.Finally collected to a cyclone as powder form.

As a swirling- flash type by rising hot air.There are hammer mill and classifier are installed inside of the dryer, so the materials of cake, flake shape can be done of drying, grinding and classifying in one process.

This dryer has a vibration motor to smooth transport of material during fluidized bed drying process.The material is put into the dryer and fluidized by the hot /cold air and driven by the propulsive force of the vibration motor.

This FINE DRYER is a process equipment to move fine particles like fluids with just a vibrating force and dry them by indirect heating so that no foreign substance gets mixed in.This dryer is also applicable for a wide range of products and even for cohesive particles, it is a breakthrough vibration dryer that makes it possible to install cracking function, dry it by low temperature, and evaporate it.

Drying is carried out by the conduction heat transfer of steam tube installed in the cylinder rotating slowly.The dryer has gradual slope of 1 to 5 degrees, and the material is fed into end inlet and discharged at the opposite end outlet during detention.

Hot air and steam are passed granulated material through and dry the material gradually.By gravity, the material moves gradually to the lower part of dryer.Drying is carried out by hot air passing through a number of perforated plates and by the heating surfaces.The hot air used for drying is discharged to the outside through exhaust plate in the dryerand steam condensate is discharged through a trap.